Slipform consultation on the treatment of problems in construction

The problems in slipform construction include, for example, the inclination of the sliding mold body, the translation of the sliding mold body, the torsion and the deformation of the mold body, and the defects of concrete realization, etc. These problems are caused by the asynchronous work of the jacks and uneven load. , The concrete pouring is not right, and there are situations such as too eager correction. Therefore, in the construction process, the first thing to do is to check the quality and strengthen the observation and inspection work to ensure good operation. If problems are found, they must be dealt with in time. The following is about the problems in the construction processSlipform consulting, I hope it is helpful to everyone!

1,Correction, if this happens during the construction process, you can use the jack height difference to correct the deviation itself or apply a certain external force to correct the deviation; but this correction process should not be too hasty, to avoid causing the concrete surface to pull cracks, dead bends, and slipforms. Occurrence of accidents such as deformation.

2,Climbing poles are bent. When the climbing poles are bent, welded steel bars or diagonal supports should be used; when the bending is severe, the climbing poles should be cut off, reconnected and then welded to the lower climbing poles, and welding should be added. byThe shape of the "person" supports diagonally.

3.Template deformation treatment, for template parts with small deformation, please use braces for compression recovery. When the deformation is severe, the template must be removed for maintenance.

4.The concrete performance defects are dealt with, using a partial erecting form to make up for the expansion fine aggregate concrete with a grade higher than the original label, and it needs to be smoothed with a trowel

Regarding some of the problems and solutions summarized in the slipform construction, if you don't understand anything, you can log on to the official website of Xingcheng Slipform Co., Ltd. for more inquiries.