The main points of construction technology of slipform consultation

The engineering selection of slipform technology must first conduct slipform consultation. The slipform construction process is too complicated. The following editor brings you knowledge about the key points of slipform construction technology. You can read it carefully!

Slip form construction includes the connection between the three processes of tying steel bars, pouring concrete and lifting the formwork, and repeats the continuous operation of the cycle. Relying on the support rods embedded in the concrete, hydraulic jacks are used to climb up along the support rods to drive the overall rise of the sliding form system until the required structural elevation is reached.

1. The slipform process has high requirements for the quality of concrete

It is necessary to do a good job in the mix ratio and design of concrete. The mix ratio of concrete is not only the basis for the quality of concrete, but also one of the important conditions to ensure the smooth construction of the slipform process; the raw materials of the concrete must be in accordance with the mix ratio requirements to ensure that the used The quality of the raw materials is excellent; in addition, the slump of concrete into the mold has a certain impact on the transportation, heat preservation, initial setting time and workability of the concrete, and the workability of the concrete also affects the smooth construction of the slipform project. It also has a big impact.

2,Be careful not to contaminate the steel bars during the concrete pouring process, because the concrete on the steel bars is not easy to clean, and it will also affect the quality of the project and the smooth progress of the process; remember to pour the concrete evenly, including the pouring speed and pouring height, and the pouring The speed should be uniform to ensure favorable sliding; and the concrete should be poured and vibrated in layers with equal thickness. It should not be poured directly into the formwork from the bucket or the placing boom, and it should be evenly arranged and unloaded on the receiving platform. , In the transfer to the template.

Regarding slipform consultation, you can pay attention to Anhui Xingcheng Slipform Engineering Co., Ltd. We have professional people to provide you with satisfactory answers.