Slipform technical service overview

In the construction process of high-rise buildings, slipform construction technology is a technology that is often used. So what follows is an overview of sliding mode technical services brought to you by the editor!

Safety technical clarification of sliding formwork:

1. When designing slipform construction, we must pay attention to the stability and safety of the structure during the construction process. Before construction, the technical department must make a feasible construction plan and process indication, and the operator must strictly abide by the implementation;

2. During slipform construction, the stacks should be scattered in strict accordance with the design requirements of the construction organization. The platform should not be overloaded to show uneven stacking. In addition, reliable stairs or stairs should be installed to facilitate the operator's access;

3. There must be sufficient lighting for the construction site, and the lighting on the operating platform generally uses 36v low-voltage lighting;

4. The high-altitude workers in the project must pass the physical examination. If they suffer from high blood pressure, heart disease or those who are considered unsuitable for high-altitude operations by the doctor, they are not allowed to participate in the slipform construction work;

5. To comply with the relevant regulations in the construction safety operation regulations. Before the doctor, the sliding template should be checked for all equipment and devices, and it can be used after proper debugging. The focus is to check the assembly, nodes, electrical and hydraulic systems of the platform;

6. Before lifting hands and feet inside and outside the platform, a light and firm safety net must be installed, and the safety net must be placed against the wall. It can only be used after acceptance;

7. In order to prevent people from being injured by high-altitude objects, a protective shed must be erected in the inner part of the silo, and a layer of steel plate protection must be laid on the upper part;

8. The equipment also needs to lay a grounding wire device, and the vibrator and motor on the platform must be grounded or connected to zero protection;

9. In addition to electric bells and signal lights, communication equipment must be equipped with three to four walkie-talkies;

10. When the sliding template is upgraded, it must be commanded uniformly, and a special person must be responsible for monitoring and taking care of it.

Doing a good job of slip form safety disclosure is of great significance to slip form construction and will directly affect the quality of the project. Anhui Xingcheng Slipform Engineering Co., Ltd. provides technical services for sliding formwork. Customers are welcome to consult.